|Customers who shopped for this item also shopped for item(s) below:
160AN/DT Replacement Cartridge Item#: 6-2100
160AN/DT Replacement Cartridge by E.L. Foust Co., Inc., is an easy to use system to refresh your air purifier. Containing 3 pounds of activated carbon of your choice, and your choice of particle filter, it can remove formaldehyde, mold, ozone, VOCs, cigarette smoke,and many other chemicals, allergens, and particles. We recommend the STD carbon mix (which is made up of 60% COCO and 40% PuraPel) and the Technostat HEPA Filter for best results. You should not need tools to change this cartridge!
We encourage our customers to recycle all the metal pieces of the cartridge back to our company. We pay the return shipping in the 48 states, and if you follow our instructions, you will qualify for a refund. You should change this cartridge every 6-9 months.
DO NOT USE WATER OR WET CLEANERS TO CLEAN YOUR PURIFIER. USE ONLY DRY CLOTHS OR BRUSH/VACUUM METHODS TO CLEAN THE MOTOR/BLOWER OR CARTRIDGE EXTERIOR.
This cartridge fits only the 160AN or 160DT air purifier units.
Cartridge physical size is 5 1/2" diameter x 10 1/8" high.
Link for cartridge change video
160DT Desktop Air Purifier, Carbonless - Item# 160DT
Foust 160DT Air Purifier is all metal construction like the standard carbon model. This carbonless model contains a particle filter in place of an activated carbon mix and provides extra particle control with an additional HEPA filter rated at 0.1 micron efficiency.
Unit is perfect for small offices, bedrooms, an other spaces not more than 180 sq. ft.
Aerostar Series 550 Odor Removal Pleated Air Filter
Aerostar Filters, made by Filtration Group, must be purchased in packages of 12 for 1" and 2" depth and packages of 6 for 4" depth. Prices shown are for cases of 12.
These carbon slurry pleated filters are designed for the control of intermittent odor problems. Carbon slurry pleated filters remove a wide range of odors and common indoor air pollutants such as food odors, paint fumes, and ozone. Constructed with a water resistant board and pleated to provide the maximum effective area, carbon slurry pleated filters are suitable for use in light duty commercial applications.
In some light duty applications, carbon slurry pleated filters can be effective as a long-term solution for controlling odor problems. Carbon slurry pleated filters can be used as a low cost method to verify the potential effectiveness of carbon for controlling an odor problem.
The carbon slurry pleated filter is well suited for use where molecular contaminant concentrations are low and/or intermittent.
The carbon slurry pleated filters are well suited for use in air make-up and re-circulation applications in office buildings, hospitals, airports, food courts, and manufacturing facilities.
Many sizes are available. Must be purchased in quantities of 6 or 12 depending on size of filter. Prices range from $9 to $45.42 for each filter depending on size.
Filter pressure drop should not exceed 0.22 "w.g. at 500 fpm for 2" deep filters or 0.24 "w.g. at 500 fpm for 4" deep filters. The carbon slurry coated media shall have 11 grams of activated carbon per squre foot of media. MERV 6 rated for particle efficiency. Sizes available from 10 x 10 x 1 up to 24 x 24 x 4. Too many to list, please call us! Must be ordered in case lot quantities.
Fume and Odor Panel Item#: FO-STANDARD
Fume and Odor Panels reduce the level of harmful vapors and gases throughout your indoor living space. The Fume and Odor Panels contain our STD mix carbon & a dust filter rated at 40% @1.0 micron, and do not produce ozone. MERV 12 rated particle filter,(Alpha-Stat), can be added for better particle filter performance. All filters are metal framed & honeycomb cell construction for the carbon.1" thickness is our stock size, but 2" & 4" thick filters are available! Custom sizes & carbon mixes available on request, call us for pricing.
We are always happy to take the time to help you with your specific air or water problem. Please contact us by phone, fax, e-mail or snail mail and we will be happy to assist you. If you purchase any products and need to return them for any reason, you must call first for authorization. Any returns may be subjected to re-stocking fees, based on the product and condition of it upon return. Water filter systems cannot be returned if it appears that the system has been installed or is missing parts.
Click here for a map of our location.
Hours of operation when you can call or visit us:
9:00 AM -4:30 PM central time USA, Monday-Friday.
Closed Saturdays and Sundays.
E. L. Foust Co.
Phone: 800.353.6878 (US & Canada), 630.834.4952 (outside US & Canada)
121 WATER STREET
|MINERAL POINT, WI 53565